Countersunk Magnet information
Strong ring magnet with countersink to screw on and 2-pole magnetization. countersunk magnet does not need a magnet with a different polarity for use in pairs.
With this magnet, the south pole and north pole are on the lowering side.
Note: You can also use two of these magnets in pairs if necessary. Simply bring the two countersink sides together and, if necessary, turn a magnet through 180 °.
The 2-pole magnetization can be seen very well in the picture with the green flux foil.
Note: If too much force is applied, neodymium magnets can break. We recommend a maximum tightening torque of 2 Nm when screwing on this magnet.
Countersunk Magnet Technical Specifications
| total diameter D | 14,0 mm |
| material | Neodym |
| temperature max. | 80 ° C |
| quality of magnetization | N35 |
| tolerance | 0.1 mm |
| direction of magnetization | diametral |
| coating | Nickel (Ni-Cu-Ni) |
| magnetic force | 3,5000 kg |
| total height H | 4,5 mm |
| weight | 0,0041 kg |
Hot Tags: Countersunk Magnet Ø 14.0 X 4.5 X 4.5 Mm N35 Nickel, China, Factory, Manufacturers, Supplier, Wholesale
