Introduction to suspension magnet
Among those famous suspended magnetic separator manufacturers, it is a professional supplier in China, welcome to wholesale well magnetic plate, suspended magnet, magnet plate, magnetic plate separator, permanent magnetic plate from our factory.
Magnetic plate separators are often designed for use in chutes or suspended over the conveyed product. The range of plate magnets is constructed from a magnetic stainless steel casing, which projects magnetic stainless steel poles for an enhanced field intensity. People often call Plate Magnets, Plate Separators, Magnetic Steel Plate, or Suspension Magnet, and so, according to its material, its way of assembly, or its functions.
Installed on the bottom side of a chute, a Plate Magnetic separator will provide max protection as the material travels through the powerful magnetic circuit. The magnetic field on the face of the Plate Magnet reaching into the material stream and pulls the ferrous particles to the magnetic face. The magnetic field on a Plate Magnet is strongest at the surface and becomes weaker the further away.
Characteristics of suspended conveyor magnet
It is important to know the suspension height of the magnet face relative to the bottom of the material burden. This information will help in the proper selection of magnet strength. Plate Magnets can be made in various strengths to optimize performance in various depth product streams. The shallower the product stream, the better the separation results will be. Heavy-duty factory-fabricated hinges, handle, and locking latches are provided for simple installation and maintenance.
Magnet Plates are an inexpensive form of magnetic protection against occasional tramp iron contamination. The magnet plates can be used in a wide range of industries and are commonly installed within a chute or over a conveyor. Magnetic plates can be manufactured with either a strontium ferrite or a high-intensity neodymium iron boron (rare earth) magnet system. The more powerful neodymium magnets solution is advised for removing much finer iron particles from powders and foodstuffs.
To extract ferrous from deeper burdens and enhance throughput rates, our magnetic separators can supply a dual deep magnetic field separator.
All plate magnets are virtually free of maintenance, with a long life service, and are not affected by wet conditions.
Advantages of the suspended magnetic separator
We offer a range of magnetic plate separators, suitable for most applications:
· primary' separators to eliminate larger particles.
· secondary' separators to improve the quality of your product, removing particles down to sub-micron size.
· with manual or fully automatic cleaning systems.
Technical drawing of the permanent suspension magnet
Plate Magnets usually have a 1" flange around the perimeter that is non-magnetic. This flange is used to seal the magnet shut to prevent the magnetic field from leaking. If the spout you are trying to protect is 12" wide, a 14" wide plate magnet should be needed. It is recommended that angle material be welded to the outside of the spout to allow the overlapping flange to seal the magnetic field. Plate Magnets suspended over conveyed products can have a flat face design if the product does not come into contact with the magnet.
Applications of permanent suspension magnet
Suspension permanent magnetic separator is mainly used to clear granular, flake and lump (such as maize, sugar, flour, ores, slag, plastic, wood, etc.) material in the ferromagnetic impurities (such as bolts, nuts, nails, wire, iron slag, etc.), widely used in ceramics, electricity, mining, plastics, chemicals, rubber, pharmaceutical, food, environmental protection, pigments, metallurgical and other industries.
Hot Tags: permanent suspended magnetic separator for conveyor belts, China, Factory, Manufacturers, Supplier, Wholesale, Plate Separators, Suspension Magnet, suspended permanent magnet, plate magnets uk, Suspended Magnetic Separator, Magnet Plate
The plate magnets are also used on the auto conveys, with self-cleaning function. Our customers state that use of our Self-Cleaning Magnetic Plate Separators have increased production to the extent that the magnet pays for itself within 45 to 60 days. The protection provided to expensive equipment such as Crushers, Grinders, shredders & Hammer mills is invaluable!
