Magnetic plastic is a new type of polymer functional material developed in the 70s. It is one of the important basic materials in the field of modern science and technology. Magnetic plastics can be divided into two types according to their composition. Structural type magnetic plastics are magnets with strong magnetic properties, and compound magnetic plastics are magnets made with plastic or rubber as adhesive and magnetic powder.
Plastic magnets are parts of many mechanical equipment. If the parts are missing, the sealing ability may not be good. Of course, it has other functions. Now we introduce the installation method of high temperature and plastic magnetism. I hope our introduction can help you better use it.
First of all, as a high-temperature plastic magnetism, it is used to resist higher frequencies in the operating frequency, and it can only exert its maximum characteristics at high frequencies. It is used in all kinds of wire harnesses, household appliances, various instruments and electronic devices, which are indispensable electronic components. It is generally indispensable for interference. If there is enough space for installation or permission, choose a magnetic ring with large outside diameter, long length, and small internal hole, but the inner diameter must be tight with the wire harness so as to exert its maximum impedance effect. If the inner diameter is too large or too loose with the harness, magnetic leakage or the like may occur.
Installation method of high temperature resistant plastic magnetic：
The first method is to use the wire harness to circle the loop repeatedly.
The second method is to wear the on-line beam through injection molding machine and form it.
The third method is the simplest and direct button in the source of interference. This is the most convenient and fast clip type magnetic ring. It is assembled by plastic shells and two chip cores, and is also called the assembled magnetic ring.
The use of sensor rings is also the same. It is important to adopt suitable installation methods in use, so that it will not fall off at work.