Encode Magnet For IC-Haus

Great Magtech (Xiamen) Electric Co., Ltd is one of the most reliable manufacturers and suppliers of encode magnet for ic-haus in China. We warmly welcome you to wholesale high quality encode magnet for ic-haus from our factory. Good service and reasonable price are available.

1. Encoder Magnets Specification:

Encoder magnets, are those permanent magnets used in magnetic encoders or sensors. According to the Hall effect, a magnetic encoder can detect the motion by converting the related magnetic flux to an electrical signal. It feedbacks and controls the motion including position, direction, speed, rotation angle, linear displacement.The multi-pole magnetic ring is usually a magnet assembly in which a rubber magnet is assembled on a hollow metal bracket (thickness 0.6mm); the rubber magnet part is magnetized, and the magnetization form is generally different in number of pole pairs (combination of N pole and S pole) ) of two columns of magnetic tracks; the multi-pole magnetic ring needs to be used together with the magnetic encoder chip, which can detect the absolute angle and rotational speed of the magnetic rotary encoder. We recommend using the iC-MU series products of iC-Haus for the magnetic encoder chip

2. Encoder Magnets Feature：

1) Light and thin: saving equipment space, compared with other companies: about 1/10 of the weight can be achieved

2) Excellent environmental adaptability: adapt to harsh environments such as dust, vibration, high temperature, oil mist, etc

3) Hollow large-diameter: suitable for large-diameter hollow shafts, which can be wired inside the hollow shafts of robot joints

4) Optional measurement output mode: when used with iC-MU series products, incremental or absolute measurement output modes can be selected

5) High resolution: used with iC-MU series products, in the case of 64 pole pairs, the angle can be measured up to 20bit (1,048,576 equal parts/revolution)

3. Output method of iC-MU:

Can be set according to the application

+ Incremental (relative angle) ▎ A/B/Z ～ 16bit (～ 65,536 pulses/rotation)

+ Absolute (absolute angle) ▎ SPI, SSI, BiSS C ~20bit

+Sin/Cos  Analog output (setting option)

+UVW ▎1～16 poles (for magnetic pole measurement of motor rotor)

After the multi-pole magnetic ring and iC-MU series products are assembled, the output mode can be set during the initial setting.

For details, please refer to the parameter sheet of iC-Haus Corporation.

4. Application:

5. Benefits

Miniature design

High speed operation

Flex cable connection

Rohs compliant

6. Notes:

1) Please make sure that the rotation runout after installation is less than the recommended value. ⇒For details, please refer to the parameter list of iC-Haus Corporation.

2) Gently press in when installing, and use adhesive if necessary.

3) Please ensure that the gap between the double row magnetic ring and the iC-MU series products and the installation position deviation are less than the recommended value.

⇒For details, please refer to the parameter list of iC-Haus Corporation.

4) Do not use it in an environment that may cause foreign matter to adhere, such as iron powder.

5) When using this product in a device that generates a magnetic field, please confirm with the sample whether there is any

Impact.

6) Do not use, store or store this product outside the specified temperature range.

7) Please confirm the angle error after installation on the actual device.

8) Please make sure that the magnetic tracks (rubber magnets) are not damaged.

9) Do not subject this product to strong shocks.

10) If the product is dropped, please do not continue to use it.

11) Do not use this product in liquid (water, oil, etc.).

12) After loading this product, please do not take it out for reuse.

Hot Tags: encode magnet for ic-haus, China, Factory, Manufacturers, Supplier, Wholesale