
According to different performance requirements, such as residual magnetic induction intensity, coercive force and maximum magnetic energy product, sintered NdFeB is represented by different brands. The coercivity increased gradually from N to AH. In each series, different numbers are used to distinguish the magnetic energy product, such as the N series has N30, N35, N38, N42, N45, N50, N52 and so on. The larger the number is, the higher magnetic energy product is.
According to the difference of climate, material and formula, we also use "-1" and "-2" to distinguish brands like N35-1, N35-2 and so on.
Product with special performance requires character description at the end of the brand.
It can be seen from the above that the brand, formula, craft and meaning varies with the English alphabet and number. We manufacture different orders and processes according to the customers' orders, so as to meet the needs of our customers.
Therefore, we should pay attention to the "anti confusion" work in the mixing and smelting operation, do not mistake the brand. Calculate the weight of the ingredients according to the formula sheet, and put the correct sign in time. The smelting operator should record the original data record and the smelting trace sheet accurately according to the brand. When the spindle is put into storage, the signs and tracking sheets of each furnace spindle must be sent to the warehouse accurately and timely for verification. At the same time, the workshop should inspect and supervise the above situation at any time. At last, we should proofread the spindle carefully, then fill in the certificate and put it in the bucket after checking correctly. When the material is released, it needs checking whether the sign outside the barrel is in conformity with the certificate in the barrel. Releasing cannot go on if it does not conform to the requirements.
It is forbidden to mix different grades of raw materials, alloy fluid in crucible, and spindle after casting. In order to prevent errors, Staff who are responsible for raw materials and ingredients should pay attention to the proofreading and verification in the ingredients, specifications, contents or numbered materials in time.
During the milling process, the spindle must be kept in line with the "smelting tracking list" when the spindle is broken. If the spindle is found to be abnormal, feedback should be sent to the melting workshop.All processing equipment must be identified with a brand name. All "to be processed" and "processed" products must have brand names. The pail for processing equipment and storing materials must be clean to prevent mixing other grades of powder.
During the molding process, the powder used must be carefully checked before and after the forming of the powder. It is said that every batch of powder in the powder box must be cleaned up to prevent powder mixing from different batches. Formed products must be clearly identified before they can be circulated. In the process of Stripping oil and sending materials into the furnace, check carefully according to the furnace inlet and the product identification sheet. After sintering, the sintered products must be identified according to the furnace list clearly so as not to confuse product.
If vague concepts and carelessness result in confusion of brands, the performance of products after sintering can not meet customer requirements, which will cause great losses to the company. So staff must put the work of "anti confusion" in a very important position.











































