How to clean the liquid slurry pipe separator?
Liquid slurry pipeline iron remover cleaning steps:
When cleaning the magentic iron remover, first the magnetic core fixing screw is opened, take out the magnetic core, clean the iron impurities adsorbed on the surface of the magnetic rod, and then install the magnetic core to the cylinder body, fix and install magnetic When checking the core, check whether the sealing gasket is completely stuck in the gasket groove to prevent the gasket from being misaligned and causing material leakage during operation. When cleaning iron impurities on the magnet surface, you can
use thick cotton gloves, rags, trays, and other tools. When necessary, you can wash with water.
Liquid slurry pipeline iron separator cleaning frequency: According to the amount of iron impurities in the processing material, the amount of material per hour and other parameters determined, the general magnetic rod surface adsorption of powdered iron impurities thickness should not exceed 10mm, regular cleaning in time, so as to maintain good The effect of use.