May 04, 2018

Wet magnetic separator is the preferred equipment for iron powder selection

Leave a message

Wet magnetic separator is the preferred equipment for iron powder selection


Wet magnetic separator is a magnetic selection equipment for iron powder selection. It is generally used in the dressing plant, sea sand iron selection, and iron powder selection. The two commonly used wet magnetic separators are forward-flow magnetic separator and semi-counter-current magnetic separator. Sorting machine.


1. In the forward flow magnetic separator, the direction of movement of the slurry is consistent with the direction of rotation of the cylinder or the direction of movement of the product. The ore slurry is fed directly from the feeder box to the magnetic system of the drum. The non-magnetic ore pellets and the magnetically weak pellets are discharged from the gap between the two bottoms under the drum. The magnetic mineral particles are sucked on the surface of the cylinder, and they are unloaded into the concentrate tank by the unloading water pipe as the cylinder rotates together with the weak magnetic field at the edge of the magnetic system. The forward flow type magnetic separator has a simple structure and a large processing capacity, and can also be used in multiple series. It is suitable for rough selection and selective operation of rough-grained strong magnetic ores with a size of 6 to 0 mm, or for recycling magnetic weights. medium.


2. Semi-counterflow magnetic separator, the ore slurry is loosely suspended from the bottom of the tank into the sorting space, the direction of movement of the ore slurry is basically the same as the direction of the magnetic force, so the ore particles can reach the cylinder surface with high magnetic field force. on. In addition, the tailings are discharged from the tailings holes on the floor so that the height of the overflowing surface can maintain the level of pulp in the tank. The above two characteristics determine that the semi-counterflow magnetic separator can obtain higher concentrate quality and metal recovery rate. Therefore, it is widely used for the rough selection and selection of ferromagnetic ores that process fine particles (less than 0.2 mm). This magnetic separator can be used in more than one series to increase concentrate grade.


The wet magnetic cylinder magnetic separator is mainly composed of a cylinder, a roller, a brush roller, a magnetic system, a tank body, and a transmission part. The cylinder is welded into a cylinder by 2-3mm stainless steel plate. The end cap is a cast aluminum piece or workpiece. It is connected with the stainless steel screw and the cylinder.


Magnetic separator is one of the widely used and highly versatile models in the industry. It is used to remove iron powder in powdered granules. Magnetic separators are widely used in resource recovery, timber industry, mining, and kilns. Industry, chemistry, food, and other workshops. The magnetic separator is applicable to the wet magnetic separation of magnetite, pyrrhotite, roasted ore, and ilmenite with the grain size below 3mm. It is also used for iron removal of coal, non-metal ore, building materials and other materials.


Send Inquiry