The quality of the disc type iron remover is not only the material selection but also the processing technology. Only when the process requirements are met can the high-quality iron remover equipment be obtained.
The steel structure of the disc iron remover must have sufficient rigidity and strength. The appearance of the disc iron remover should be smooth and beautiful, and all welds should be smoothed.
Disc type electromagnetic iron remover suspension facilities such as suspension booms, rings, ears, etc. must be safe and secure, and should meet the requirements of long-term use.
The steel required for the manufacture of the disc iron remover shall be subjected to shot peening or sandblasting. The surface of the disc iron remover shall be coated with two primers and two layers of paint, and a certain amount of on-site touch-up paint shall be provided. The color of the disc iron remover finish should be determined by the purchaser.
The surface cleaning and painting construction of the disc iron remover must strictly implement the relevant standards.
The noise of the disc type iron remover at 1 m from the device should be less than 85 dB.
The disc type of iron remover has a motor protection rating of IP54.
The structure of the disc type iron remover should all be welded and sealed, and the disc type iron remover should prevent the internal coil from being invaded by external water vapor. The disc type iron remover coil should be made of advanced insulating material, and the disc type iron remover should have high insulation protection grade and heat resistance. The core material of the disc type iron remover should be made of an electric iron.