1. Opening method
In the process of thickness magnetization, it cannot be directly peeled off, because one of its main characteristics is hard and brittle. When using a relatively brittle magnet, it cannot be peeled off directly to avoid bad peeling or Breakage caused by excessive force, once broken, can no longer be used, and may cause accidental injury.
2. Push method
Thick magnetized magnets should be pushed away. If the magnetism is too strong, it will be easy to pinch your hands. Push them as far as you can, there is also a push method. Make sure to push it away with parallel force when pushing so you don't squeeze it hard or damage it. Usually, larger-sized magnets should be handled by the manufacturer as much as possible. Usually, environmental protection paper is used to separate the magnets. This is done to avoid wasting time, wasting energy, and easily hurting people during use. Therefore, when using the magnet, pay attention to pushing it away according to the prescribed method.
3. Placement method
If it is a pair of magnetized NdFeB magnets, they must be placed in pairs and be careful when placing them. Don't let it become demagnetized. Once it loses its magnetism, it can no longer be used, and it must be replaced at this time.
4. Avoid collisions
In the process of use, it should be noted that its material is relatively easy to become brittle, so be careful in the process of using it, and must avoid collisions. Once accidentally dropped on the ground, it is easy to break, or If it foams, it can no longer be used.
Therefore, when using different magnetization methods and different magnetic strengths, NdFeB magnets should pay attention to how to use them. Although it is a powerful magnet, it is also very brittle, so it is better to be careful.