May 30, 2018

Application of Iron Remover in Ceramic Industry Production

Leave a message

Application of Iron Remover in Ceramic Industry Production


The basic principle of iron remover


The use of magnetic fields for the attraction of ferromagnetic materials, the equipment that separates iron minerals from raw materials is called a separator, also called a magnetic separator. The basic condition for the purpose of sorting is that the attractive force (F) of the magnetic field to the ferromagnetic material is greater than the resultant force (Fc) that prevents the magnetic particles from being separated out. Fc is also called a competitive force. It includes the gravity, centrifugal force and inertia of the ferromagnetic particles. Force and fluid resistance.


It can be seen that the viscosity of the slurry, the size of the iron mineral particles, and the flow velocity of the mud all directly affect the size of the competitiveness, that is, the effect of removing iron. Therefore, in the use of iron remover, we must carefully grasp the slurry's "four degrees" (concentration, viscosity, speed and particle size): Particle size should be determined by the choice of mesh size of the screen mesh; speed and flow are directly related; viscosity and slurry , concentration properties and additives; concentration and water ratio.


A practical iron remover should have the following three conditions:


(1) Strong enough magnetic field source (F>Fc);


(2) Adequate contact area to ensure the opportunity and place for prey;


(3) Clean (separate) ferromagnetic impurities that have been absorbed in a timely and effective manner. Cleaning is the key to effective iron removal.


Types of iron removers commonly used in the ceramic industry


(1) According to the mineral principle, there are dry powder and wet (slurry) iron remover;


(2) Magnets and electromagnets are divided according to the way the magnetic field is generated;


(3) According to the external structure: slurry tank closure type, slurry tank settlement type, cylindrical tank type; dry powder is suspended, belt type and bucket vibration cabinet (box) type;


(4) According to cleaning methods: manual cleaning, semi-automatic and automatic;


(5) According to work status: intermittent and continuous.


Iron removal process should pay attention:


(1) According to the characteristics of ferromagnetic substances on ceramic products, analyze the source and severity of ferromagnetic impurities in the products, and then take appropriate measures to block the source of impurities. (2) When arranging the position of the iron remover, the following principles should be followed:

   a) Removal of iron should be carried out in the screened raw materials to prevent large particles and other impurities from entering the nearby iron troughs and hindering the normal functioning of the iron remover;

    b) Removal of iron should be as low as possible in order to extend the service life of the magnet;

    c) According to the type of ferromagnetic material, choose the appropriate magnetic separator;

  (3) The height of the slurry section of the permanent magnet slurry interceptor and the iron remover should be appropriate, and the ferromagnetic impurities on the upper level should be basically guaranteed to be within the range of the effective magnetization range.

  (4) The cleaning magnetic bar is the key to ensure the iron removal effect, especially the high gradient magnetic field, its radial attenuation is faster, and the effective magnetic path is shorter; only when the work surface of the iron bar magnet (block) is cleaned in time can it be normal. Play the role of magnetic fields and gradients. The interval between cleanings should be based on the amount of iron in the slurry (powder) combined with empirical data.

  (5) Due to the different prices of high and low temperature magnetic bars, magnetic bars should be selected according to the use temperature, in order to achieve the purpose of economic use.

  (6) The oxidation (rust) of the magnetic rod (core) will cause the magnetic field to weaken, so be sure to clean the magnetic source carrier when the iron remover is deactivated; be sure to check both ends of the seal when purchasing the iron magnetic stick. Whether it is intact, there can be no leaks, to prevent the magnetic core from contacting the slurry to oxidize or corrode and demagnetize.

(7) Strikes and vibrations will change the direction of part of the magnetic moment of the magnetic source material, thereby weakening the magnetic field. The operator must be very careful.


In order to solve the current demand for iron removal equipment in the ceramic industry, our company has introduced a high-magnet magnetic field high-quality permanent magnet automatic high-efficiency iron remover. Through practical application of several companies, the effect is satisfactory, reaching the design index; gradually introduce a fully automatic permanent magnet Electromagnetic iron remover, high field resistance and high temperature iron removal magnets and other new products to meet the needs of ceramic enterprise production.


Send Inquiry