Everyday maintenance of permanent magnetic iron remover can not be underestimated
The maintenance of the permanent magnetic iron remover is an extremely important and regular work. It should be closely coordinated with the extreme operation and maintenance, etc. There should be a full-time staff on duty.
1. the shaft bears the full load of the negative machine, so good lubrication has a great bearing on the bearing life, it directly affects the service life and operating rate of the machine, thus requiring the injected lubricating oil must be clean, the seal must be good, the machine's The main oil filling place: a, rotating bearing; b, roller bearing; c, all gears; d, moving bearing, sliding plane.
2. Looseness of newly installed tyres is liable to be checked frequently.
3. pay attention to the work of all parts of the machine is normal.
4. pay attention to check the wear of the wear parts, always pay attention to replace the worn parts.
5. Put the mobile device's chassis plane, should go out of dust and other things to avoid the machine encountered the material can not be broken when the mobile bearing can not move on the chassis, resulting in serious accidents.
6. If the bearing oil temperature rises, you should immediately stop and check the cause to eliminate it.
7. When the rotating gear is in operation, if there is impact sound, it should immediately stop and check, and eliminate.