Purchase iron remover precautions
Separators | Pipe Type Separators | Suspension Type Permanent Magnet Separators | Manual Type Permanent Magnet Separators | Permanent Magnet Dump Separators | Permanent Magnet Separators | Slot Type Permanent Magnet Separators | Permanent Magnets
1. When selecting the iron remover, the user must first consider whether it is the conveying belt conveyor, bandwidth, belt speed, dip angle, the nature of the material, humidity, granularity, thickness, the amount of iron in the material, the grain size and properties of the ferromagnetic material, Iron requirements, use environment (temperature, humidity, dust, non-corrosive, etc.), characteristics of the iron separator itself, location of installation, and space size.
2. When the amount of iron in the material is large, RCDC, RCDD, RCDF series of self-unloading electromagnetic separators with continuous automatic iron removal; RCYC series of permanent magnet separators; RCT series permanent magnet rollers; CFLT series electromagnetic roller.
3. When the amount of iron in the material is small, RCDA, RCDB, and RCDE series of artificial iron-unloading suspension electromagnetic electromagnetic separators shall be selected; RCY series permanent magnet iron remover shall be used.
4. When the ferromagnetic material in the material is particularly low, GJT series metal detectors are used together with the magnetically-magnetic self-dumping electromagnetic and permanent magnetic iron remover to automatically monitor and remove iron, which has the advantages of energy saving, long life, and iron removal. Good features.
5. When using suspended electromagnetic and permanent magnetic iron remover, if the material is too thick, it can be used together with WCG series non-magnetic parallel idler to increase the depletion rate. The height of the suspension can also be appropriately reduced to achieve the desired iron removal effect.
6, when the use of environmental dust (such as coal dust, dust, dust) is more serious, should use RCDB, RCDE series fully sealed electromagnetic iron separator, RCY series permanent magnet separator.
7. When the material contains metal materials that cannot be adsorbed by the iron remover, a metal detector shall be selected by a GJT series metal detector to manually remove the iron after the automatic shutdown.
8, when the user does not use the conveyor belt and chute, pipe, chain machine, hoist and other equipment to transport materials, should use RCYA.G.S series of pipeline-type permanent magnet remover.
9. The main features of the iron remover are: it is easy to absorb long, large-shaped ferromagnetic materials in short and small shapes; the shape of the suction tip is easy to be spherical; the suction is easy to be static.
10. For those occasions requiring high iron removal, if the required suspension height is greater than the rated suspension height or the thickness of the material is greater than the rated thickness, the specifications of the separator shall be properly increased or multistage iron removal shall be adopted.
11. When the magnetic separator is selected, the material is pulp, and wet CT (counterflow tank N) (semi-reverse flow tank B) (downstream tank S) is required. If the user's material is dry powder, use CXJ dry powder cartridge magnetic separator, the size can be based on user output t/h.